Omega Juicers MM1500

Celery juice specialist with multifunctions - recommended by Anthony William

Make 1 out of 2! The Omega Juicers MM1500 merges two well-known juicers in an optimized way: It is a celery juice specialist (like the Omega Juicers MM900) - which is why it is recommended by celery juice expert Anthony William. And the Omega Juicers MM1500 has the multifunctions of the Omega Juicers 8228, so you can also use it to make sorbets, nut milks, pasta, or even grissinis.

The Omega Juicers MM1500 has been optimized for a higher juice production of 1.5 liters without pausing, plus a wider filling shaft. This makes the Omega Juicers MM1500 even easier to handle, whether juicing or cleaning.

• Specialist for celery juice: The Omega Juicers MM1500 is equipped with an additional pomace regulation for the production of celery juice. Result: it gets just about every drop out of celery stalks!
• Multifunctional: The Omega Juicers MM1500 can not only juice, but also make sorbets, nut milks, pasta or grissinis.
• More juice production without a break: the Omega Juicers MM1500 can easily press up to 1.5 liters of juice without a break; the drum seal and cap, as well as the sieve, have been adapted to larger quantities.
• Backed by a 5-year warranty on all parts.

Overview

• About the manufacturer Omega
• What is the quality of the juice?
• How suitable is the Omega Juicers MM1500 for making celery juice?
• What other preparation options are there?
• Operation & Handling
• Cleaning
• Recommended accessories
• Technical data
• Scope of delivery
• Warranty

About the manufacturer Omega

The American company Omega has been producing juicers for the production of cold-pressed juices since the 80s. Time and again, the manufacturer has adapted its models to meet the needs of buyers. The latest result is the Omega Juicers MM1500 - a slow juicer that celery juice expert Anthony William explicitly recommends for the production of larger quantities of celery juice, but which also reliably produces all green juices or mixed juices from fruits and vegetables with a high juice yield. New: The MM1500 can also be used for other popular preparations: Sorbets, nut milks, pasta or even grissinis.

↑ up

What is the quality of the juice?

The Omega Juicers MM1500 can produce the full range of freshly squeezed juices: Green juices, celery juice, juice from roots such as carrot or beetroot juice, sauerkraut juice and the popular ginger shots or ginger-turmeric shots. Thanks to the pulp regulator, the Omega Juicers MM1500 presses the juice ingredients so efficiently that it shines with a very good juice yield, especially with celery, leafy greens and grasses

The juice quality is clear and virtually fiber-free at 80 rpm, the ingredients are juiced in a way that is gentle on nutrients and does not generate heat. The taste is round and smooth.

How suitable is the Omega Juicers MM1500 for making celery juice?

Like the Omega Juicers MM900, the Omega Juicers MM1500 also has a special celery juice pulp regulator with an extra seal. Result: The MM1500 scores with a very, very good celery juice yield and can compete on this point with the best celery juice juicer, the Angel Juicer.

Preparation tip: Cut the celery stalks into 1-2 cm long pieces. In our experience, the Omega MM1500 juices faster and more efficiently.

↑ up

What other preparation options are there?

The Omega Juicers MM1500 is equipped with a wide range of accessories for homogenizing and pureeing, as well as for making dough and pasta. For this purpose, the puree sieve is used instead of the juicing sieve in combination with the corresponding cap and the various nozzles for grissini and pasta types.

Other preparations at a glance:

• Fresh nut milk, e. G. from almonds and/or hazelnuts
• Fruit purees made from cooked fruits - e. G. apple puree
• Fruit sorbets and ice cream
• Nut porridge made from roasted nuts, e. G. peanuts or cashews
• Baby food made from raw fruits or cooked ingredients

↑ up

Operation & handling of the Omega Juicer MM1500

Structure of the Omega Juicer MM1500

The Omega Juicers MM1500 is not only an efficient slow juicer, it is also very easy to assemble and operate. 6 parts need to be assembled: First, attach the juice housing including the feed chute to the motor block via the locking ring so that the handle is in the CLOSE position. Now place the feed hopper on the feed chute. Now insert the pressing screw and underneath it the juicing sieve. Lastly, attach the pulp regulator to the cap for juicing and then attach this to the juice housing with a left turn. Now place the juice container and the pulp container under the juice outlet and connect the Omega Juicers 8228 to the power supply.

Tip: If you want to make your juice completely without fiber residue, place the supplied juice sieve on the juice container.

Adjusting the pulp regulator

For making clear juices from hard ingredients like carrots, beets, crisp apples, or fibrous ingredients like celery, leafy greens, or herbs, we recommend turning the pulp regulator completely closed with a counterclockwise rotation. This way, the ingredients are pressed out with increased pressure against the sieve at 80 rpm with maximum juice yield.

This pulp regulator can also be maintained when juicing hard ingredients alternating with soft ingredients such as ripe pears or pineapples, berry fruits or stone fruits such as nectarines and peaches.

If only soft juice ingredients are juiced, the pressure on the pressed material should be reduced by opening the pulp regulator with a clockwise rotation.

Juicing with the Omega Juicers MM1500

Before you start juicing, wash the ingredients, peel them if necessary and cut them to fit the diameter of the feed chute. Now start the Omega Juicers MM1500 by switching the central function button on the back of the motor block to ON. Now slowly add the ingredients one by one into the feed chute, pushing with the tamper to the pressing auger if necessary. When all the ingredients have been juiced, leave the juice collector for another 1-2 minutes to collect the remaining drops of juice. When you remove it afterwards, simply place a cloth under the juice outlet to prevent staining the countertop.

Tip: If you even cut the ingredients to 2-3 cm in size, the Omega Juicers MM1500 will not only juice faster, but you will also get a few more drops of juice out of the ingredients.

↑ up

In case of ingredient backlog, activate REV function

If an ingredient jam occurs in the feed chute during juicing, you can clear it by activating the REV function with the central function button on the back of the motor block. To do this, keep the REV function pressed. Now the press auger rotates backwards and releases the jam. After about 10-15 seconds, release the REV button again, wait until the pressing auger stops rotating and restart the juicer.

Tip: An ingredient jam is mainly caused by juicing soft ingredients such as mealy apples, ripe pears or zucchini. If you juice the soft ingredients alternately with hard ingredients such as carrots, beet or fibrous ingredients such as leafy greens or celery, an ingredient jam can be avoided from the start!

For the complete Omega Juicers MM1500 Instruction Manual »

↑ up

Cleaning the Omega Juicer MM1500

The Omega Juicers MM1500 is easiest to clean directly after use. This is because the juice residues have not yet dried!

To do this, switch off the device, separate the juice housing from the motor block and place directly in the sink. Now disassemble all parts and first remove the pulp residues with your hands directly into the organic waste. Now rinse all parts well with lukewarm water. Clean the sieve with the supplied cleaning brush and also rinse well. Finally, empty the pulp container and rinse well together with the juice container. Either place all parts on a kitchen towel to dry or dry quickly and reassemble the juicer.

↑ up

Recommended accessories for the Omega Juicers MM1500

Cleaning brush

Our cleaning brush makes cleaning the Omega Juicers MM1500 even more convenient. The cleaning brush is perfectly shaped to quickly and thoroughly remove juice residues from the feed chute and juice housing. And of course, you can also use our cleaning brush very well for cleaning bottles, because it even fits through bottle necks with a diameter of 3 cm.

Cleaning Brush for Containers, Juicers & Bottles

€7.90

Add to Cart

↑ up

Technical data of the Omega Juicers MM1500

• Model: Omega Juicers MM1500
• Juicing method: horizontal - 1 auger/li>
• Dimensions (height x width x depth): 32 cm x 15.5 cm x 47cm
• Diameter of the drum: 5 cm
• Weight: 7 kg
• Power: 200 watts; 80 revolutions per minute
• Voltage: 220 - 240 volts, 50 - 60 Hz
• Material: BPA/BPS-free plastic
• Fuse: 250V 5A 50T

↑ up

Omega Juicers MM1500 Scope of delivery:

• Motor block with power cord
• Juice extractor housing incl. drum
• Filling funnel
• Pressing screw
• Closing cap incl. pulp regulator
• Pomace regulator incl. seal for celery juice production
• Fine sieve for juicing
• Closing cap for pureeing
• Puree insert
• Pasta set with 4 pasta nozzles
• 2 grissini nozzles
• Juice collection container made of BPA/BPS-free plastic
• Pomace collection container made of BPA/BPS-free plastic
• Strainer insert for juice collection container
• Stopper
• Cleaning brush
• Omega Juicers MM1500 Instruction Manual »

↑ up

Warranty of the Omega Juicers MM1500

For purely private use:

• Motor & gearbox: 5 years
• All other parts: 5 years

Complete warranty conditions »

↑ up